S.M.Engineering Works

Product description:

• Standards: IS 2376 (PART-IV) & BS 812:111
• Specification: The Aggregate Crushing Value (ACV) test set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable.
• Consists of M.S. Cylindrical Container 150mm +/-0.5mm dia x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6mm thick. A Plunger of 148mm +/-0.5mm dia x 100 to 115mm high. Supplied complete with Tamping Rod, 16mm dia x 600mm long, both ends rounded, 1 no. Metal Measure 115+/- 0.5mm dia x 180 +/- 0.5mm high.
• Note: On Special Request Aggregate Crushing Value Apparatus having 75mm dia or 300mm dia. cylinder size can be supplied.

Product description:

Due to our rich industry practice, we are presenting an extensive range of Depth Gauge. Due to high demand in the market, we present this product in diverse specifications that meet on market demands. Furthermore, this product is made employing the finest quality raw material and advanced techniques. Moreover, we offer this product at low prices.

Feature:

• Smooth finish

• Fine finishing

• Low prices

Product Description:

• Standards: IS 2386 (PART IV) 9377 & BS 812:112
• Specification: It is robustly designed to determine the aggregate impact value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact. The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion.
• The instrument consists of a circular base with Two vertical guides. The Hammer of weight 13.75 +/-0.25kg can be raised to fall freely down the vertical guides. The Height of fall can be adjusted through 380 +/- 5mm. The Hammer is provided with a locking arrangement.
• The hammer falls freely to the base and is removable for employing. Supplied complete with metal measure 75mm dia x 50mm high (For specimen preparation) and Tamping Rod 230mm long x 10mm diameter. A Blow Counter to count the number of strokes is fitted on top of the equipment.

Product Specification:

• Standards: ASTM D2-33 & IS 2386 (PART IV)
• Specification: It consists of two hollow cylinders closed at one end and provided with Fitting covers at the either end. These cylinders are mounted an a shaft at angle of 300 with the axis of rotation of the shaft. The shaft rotates at 30-33 RPM. Through a reduction gear operated by a motor and is provided with a revolution counter. Complete with Abrasive Charge consisting of 12 Nos. Hardened steel Balls of 48mm dia. Suitable for operation on 440 Volts, Three Phase, 50 Cycles, A.C. supply.

Note: Option of Digital Preset Counter can be provided at an Extra Cost

Minimum order quantity: 1 Set

WE are one of the leading manufacturers of Bitumen Testing Equipment, Soil Testing Equipment, etc.

Product description:

• With fine adjustment
• Made of stainless steel
• Satin chrome plated reading surface

Product Description:

• Standards: BS 812
• Specification: It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 RPM.
• Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two Conical Hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 V, 50 cycles, A.C. Supply.

Product Description:

• Standards: IS 2386 (PART-III) & BS 812.
• Specification: Made of Brass / GI with Stainless steel Wire Mesh 6.3mm / 4.75mm size Ruggedly Constructed, Approximately 20cm dia x 20cm high. Complete with Handle.

Product description:

• Standards: IS 2386 (PART-III) & BS 812
• Specification: It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Capacities available 3, 5, 7, 10, 15, 20 & 30 liters. Complete with One Tamping Rod 16mm dia x 600mm long both ends rounded.

Product Description

• Standards: IS 2386 (PART-1) & BS 812
• Specification: Consists of a hard wood base with vertically mounted metal studs as Specified in the IS 2386 (Part-1) & BS 812.

Product Specification:

• Standards: IS 2386 (PART IV) ASTM C 131, AASHTO T-96
• Specification: The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 R.P.M. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with Abrasive Charge consisting of a set of Twelve hardened steel balls, approximately 48mm dia. Suitable for operation on 440 V, 3 Phase, 50 cycles, A.C. Supply.

Minimum order quantity: 1 Piece