S.M.Engineering Works

Tri Nagar, New Delhi, Delhi

GST No. 07AJLPM5582F1ZW

Send Email
0804763194782% Response Rate
Search

Home » Our Products » Compression Testing Machine


Compression Testing Machine

Our range of products include channel type compression testing machine and 2000kn digital compression testing machine.

Channel Type Compression Testing Machine

REQUEST CALLBACK

Channel Type Compression Testing Machine
  • Channel Type Compression Testing Machine
  • Channel Type Compression Testing Machine
  • Channel Type Compression Testing Machine
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 85,000 / UnitGet Latest Price

Product Brochure
Product Details:
BrandSMEW
Voltage (V)440V
Power SourceAC
MaterialCast Iron
Compression Testing Space650 mm
Max Piston Stroke350 mm
Capacity200 Ton
Surface treatmentColor Coated
Country of OriginMade in India

Product details:

  • Standards: IS 516, BS 1881
  • Specification: In these load frames “C” channels are used, they are welded at the top as well as bottom and with stand high loads. A hydraulic jack is fitted at centre of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame. To the lower end of this lead screw is fixed the upper platen with spherical seat for self alignment. The platens are accurately machined, hardened and polished. The lower platen grooves to correctly place the specimen. The ram dia of the machine varies from the requirements of the customer. The lower pattern are at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to fit in the cylindrical/ cube moulds. Spacer provided to adjust cubes and cylinders. A 20 cm dia. pressure gauge with maximum load induction pointer is fitted on the top panel and in turn is connected to the hydraulic pressure pipe. On the right hand a console is fitted within which the electrical motor is fitted along with its coupling which in turn is connected to the pumping unit. A slow / fast loading rate regulator fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analyzing it with a compression level indicator is provided as a dip stick.
  • Note: The platens are normally rectangular on shape, but on special request square platens or circular platens can be supplied at an extra cost.


Optional
:

  • Ranges: 50 kN to 3000 kN
  • Extra gauges can be attached to the machine (max. 3 nos. ), for better accuracy and results.
  • Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.
Yes! I am Interested

2000Kn Digital Compression Testing Machine

REQUEST CALLBACK

2000Kn Digital Compression Testing Machine
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.25 Lakh / UnitGet Latest Price

Product Brochure
Product Details:
Display TypeDigital
BrandSMEW
MaterialMild Steel
Frequency50 Hz
Power SupplyAC
ColourBlue
Voltage230 V
UsesLaboratory
Country of OriginMade in India

Product Description:
  • Standards: IS 516, BS 1881
  • Specification: The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings.


Optional:

  • Ranges: 50 kN to 3000 kN
  • Channel and Pillar Type Both Are Available.
  • Extra gauges can be attached to the machine (max. 1 nos. )
  • Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.
Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Lalman Maurya (Proprietor)
S.M.Engineering Works
471/34, Onkar Nagar C, Tri Nagar
New Delhi - 110035, Delhi, India
Call Us: 
Call Response Rate: 82%
Share Us :



© S.M.Engineering Works. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

S.M.Engineering Works