Penetrometer
Our product range includes a wide range of dynamic cone penetrometer, soil cone penetrometer, pocket concrete penetrometer and standard penetration test.
Dynamic Cone Penetrometer
Get Best Quote
Request Callback
₹ 11500 / PieceGet Latest Price
Product Brochure
| Weight | 8 Kg |
| Material | Mild Steel |
| Brand | SMEW |
| Color | Silver |
| Automation Grade | Semi-Automatic |
| Country of Origin | Made in India |
| Model No | SMEW-0006 |
| Depth | 800 mm |
| Height | 575 mm |
- A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements
- Provides fast and efficient method of obtaining information
- For continuous measurements up to a depth of 800 mm and 1,200 mm with the extension rod.
- Portable and can be accommodated in a carrying case
- A typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measurements with DCP and California Bearing Ration (CBR) so that the results can be interpreted and compared with CBR specifications for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of CBR, especially for fine grained materials. It incorporates a 8 Kg weight dropping through a height of 575 mm and a 60 deg. cone having a diameter of 20 mm. It is supplied complete with assembly tools and weighs 20 Kg approx.
- The DCP needs three operators, one to hold the instrument, other to raise and drop the weight and a technician to record the results. The instrument is held vertically and the weight carefully raised to the handle limit and then allowed to fall onto the anvil.
- The equipment consist of the following replaceable parts Top and Bottom Rod, Handle, Hammer, 1m Scale, 60 deg. Cone, Anvil.
Yes! I am interested
Soil Cone Penetrometer
Get Best Quote![Product Image]()
Request Callback
₹ 1500 / PieceGet Latest Price
Product Brochure
| Material | Mild Steel |
| Automation Grade | Semi-Automatic |
| Color | Blue |
| Brand | SMEW |
| Country of Origin | Made in India |
| Model No | SMEW-0020 |
| Weight Gram | 148 gm |
- Specification: For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit.
Yes! I am interested
Pocket Concrete Penetrometer
Get Best Quote![Product Image]()
Request Callback
₹ 1000 / UnitGet Latest Price
Product Brochure
| Display Type | Manual Type |
| Brand | SMEW |
| Size | 2" |
| Usage/Application | Concrete Hardness Tester |
| Country of Origin | Made in India |
| Model | SMEW-0005 |
- Specification: It consists of a light weight barrel assembly with a polished and ground steel loading piston plunger. A direct reading scale is engraved on the piston barrel and indicates load in kg. / sq. cm. A maximum load indicator ring is provided on the penetration plunger. The calibrated spring is heat treated and plated for rust resistance. The barrel diameter is 20mm and the length 150mm. Supplied with carrying case.
Yes! I am interested
Standard Penetration Test
Get Best Quote![Product Image]()
Request Callback
₹ 40000 / UnitGet Latest Price
Product Brochure
| Brand | SMEW |
| Material | MS |
| Color | Blue |
| Height | 750 mm |
| Length | 5 mtr. |
| Weight | 65 kg |
| Country of Origin | Made in India |
| Diameter | 35 mm |
| Depth | 300 mm |
Product Description:
- Model No.: SMEW-0045
- Standards: As Per IS 2131, IS 9640
- Specification: The sampler is made from a steel tube split length wise & held together by a head fitted with a ball check valve & a hardened steel shoe in size cutting edge of 35 mm dia The sampler is 35 mm i.d. & 50.8mm in outer dia & 508mm long. One adopter to connect 'A' type drill rods is also supplied.
- This can be used in drilling operations to increase the footage & improve jab safety consist of three metal pipe legs approximately 5 mtr. long connected by a tie bolt each leg is made up of two parts for ease of transportation complete with one pulley one leg has building ladder Standard Penetration Test is a powerful tool for measuring the penetration resistance of the ground and for relating it to the degree of compactness of cohesionless soil and consistency of cohesive soil. The results can be used for design of foundations. SPT is widely used for measuring the undisturbed strength of the soil and for assessing its resistance to liquefaction due to ground vibrations caused by earthquakes or other dynamic forces. The Standard Penetration Resistance is measured as the number of blows ‘N’ required to drive a split spoon sampler to a depth of 300 mm using a 65 kg weight falling freely through a height of 750 mm.
- Spares: Body of split spoon sampler, shoe of split spoon sampler, head of split spoon sampler
Yes! I am interested
Product Videos
Compression Testing Machine
Get Quote
600KN Universal Testing Machine
Get QuoteContact Us
Lalman Maurya (Proprietor)
S.M.Engineering Works
North West Delhi, 153/15, Onkar Nagar B, Tri Nagar, Ganeshpura Sub Post Office, New Delhi - 110035, Delhi, India
Send Email
08047631947